If you are reading this article then most probably you have lost your remote or planning to buy your favorite universal remote. Craig Soundbar is one of my favorite Soundbar thanks to its affordability and quality. Similarly, Craig Soundbar remote works with any kind of universal remote all you need is Craig Soundbar remote codes.
There are different types of universal remotes in the market you can easily pair these remotes on Soundbar using remote codes. If you are planning to switch the Craig Soundbar remote with your favorite universal remote then you are in right place. In this article, we will discuss the different methods to program a universal remote. In addition to this, we have also brought remote codes to program the remote as well.
Criag Soundbar remote codes
There are different types of remote code used in Craig Soundbar like five digits, four digits, and three digits. According to the model every Soundbar has a different remote code. So, we have brought all these types of remote code so that you can program any model of Soundbar.
Five digits remote codes are mainly found on the old version of the Soundbar. If you are using the old model of Craig Soundbar then I will suggest you try these codes while programming universal remote.
This is another remote code that is mainly found in the new model of Soundbar. Four digits remote code can also be found on the old model but I will suggest you to try these codes in the newer Craig Soundbar.
Four digits codes are found in both the old and new models of the Soundbar speaker. If the above code didn’t work in your remote then make sure to try these remote codes.
How to program universal remote on Craig Soundbar using remote codes?
As mentioned earlier there are different types of universal remote on the market. It is not necessary that every remote has the same method to program the remote.
However, there are some common steps in all the universal remote. It will help you to figure out while programming any kind of universal remote. Here is the step-wise instruction to program your Craig Soundbar universal remote.
- Turn on the soundbar and make sure it is working properly then also make sure that your remote is working fine.
- After this press, the setup/set button on your remote and hold the LED light will blink on the remote.
- Now enter the remote code from the above list according to the model of your Soundbar.
- After you enter the remote code now press the TV button.
- Now press the volume button menu button whether it is working properly or not.
- If it working fine then press the exit button to save the code. Similarly, if the remote doesn’t work then repeat the same process from step 2.
This is how you can program your Craig Soundbar using remote codes. Unlike the auto search method, it might take a bit of time unless you find the right code for your Soundbar. So, make sure to try every remote code from the above list unless it starts working well.
How to program universal remote on Craig Soundbar without using remote codes?
You can also program your Craig Soundbar without using remote code it is possible. Universal remote already contains hundreds of different codes of TV, Soundbar, and DVD.
We will scan all these codes one by one through the auto search process. The scanning will stop when the remote find the right remote code of the Soundbar. Here is the step-wise instruction to program your Craig Soundbar without using remote codes.
- Turn on the soundbar and then put the battery on the universal remote.
- Now press and hold the setup/set button for a while and a LED light will blink on the remote.
- When the LED light glows the remote will go into learning mode now press the power on/off button from the remote.
- Now press the volume up or down button unless the Soundbar in this case turns off.
- When the Soundbar turns off press the exit button to save the code.
This is how you can program your universal remote on Craig Soundbar. I hope that the method has worked well in your Soundbar. If it didn’t work then make sure to look at the information booklet of the remote. There you will find full step-wise instruction to program your Craig Soundbar universal remote.
These are some of the methods and remote code to program your Craig Soundbar. I hope that after reading this article you have also found Craig Soundbar remote codes as well. However, if you didn’t then the auto search method should work on your device or remote. If you have any problem related to programming Craig Soundbar then do comment to us.