in

Blackweb remote code for Blu-ray player

Blackweb Blu-ray player codes

Blackweb is one of the popular universal remotes that can pair with almost any kind of device. This is why it is also called also multipurpose universal remote controller as it can be used by any kind of device. Similarly, if you have a Blu-ray player in your home then you easily program your Blackweb remote to work with it.

However, you should have remote codes of your Blu-ray in order to program Blackweb universal remote. There are different codes for different devices if you don’t know anything about the remote code then don’t worry. Here we will discuss different types of remote code for Blackweb Blu-ray players. Besides this, we will also guide you to program your Blackweb remote.

Blackweb Blu-ray player

Blackweb remote code for Blu-ray player

Every Blu-ray player has different remote codes you can’t use the same code for every player. There are different codes for different Blu-ray player brands. So, today we have brought the list of 23 different Blue-ray players and their remote codes.

Player Remote codes
Funai 2378
HITACHI 0419, 0150, 0225
HP 1810
INSIGNIA 1871, 0899, 1874
JVC 1789
LG 1981, 1980, 2281
MAGNAVOX 1934, 1877, 2381, 2287
ONKYO 1893
OPPO 1855, 2022
PANASONIC 1399, 1925, 1923
PHILIPS 1976
PIONEER 1378
SAMSUNG 2399, 1099, 0454, 1908, 2030, 1906
SANYO 2273
SHARP 1952, 2019
SHERWOOD 1824, 1809
SONY 1934, 1935, 1936
SYLVANIA 3027, 2013, 1878
TCL 1825
TOSHIBA 1852, 1850, 1851
VIZIO 2024, 1770
YAMAHA 2017

These are some of the popular Blue-ray players I hope that you have found your remote code on this list. If you have found your player brand then note down the remote codes.

How to program Blackweb universal remote on Blue-ray player using remote codes?

There are different ways to program universal remote you can program your remote using code and without using code. In this method, we will discuss how to program the Backweb blue-ray player using remote code. I hope that you have found your remote code for your player. Now here is the step-wise instruction to program your remote using remote codes.

  1. First of put the battery on your remote and make sure it is working properly.
  2. Turn on the TV.
  3. Press and hold the power button. Press until the LED light on the power button blink. LED light is the indication of your remote going into learning mode.
  4. Press Blue-ray/DVD button from the remote.
  5. Enter the remote code of your Blu-ray player after this the LED light on the remote turns off.
  6. After this press a different button on your remote and check either it is working properly with your Blue-ray player or not. If not then try all the remote codes that you have collected from the above list.

This is how you can program your Blackweb universal remote using remote code. This is a manual method so if you happen to find your code on the first try then it won’t consume much of your time. If you won’t, then you need to go through all the codes unless you find the right remote code.

Read this too: Cox Universal Remote Codes For TV

How to program Blackweb Blue-ray remote using code search method?

This is another easy and popular method to program your remote in your Blue-ray player. If you are unable to program your remote from the above method then you need to try this method. Unlike other methods, this method might take a couple of minutes unless we find working code for our remote. Here we force our remote to find working code for our player.

If you happened to find your remote code in the first of the list then it won’t consume much time. Similarly, if you find your code on the end of the list it can take up to 5 minutes. So, here is the step-wise instruction to program your remote using the code search method.

  1. First of all turn on the TV and make sure the remote is working fine.
  2. Press and hold the power button unless it goes into learning mode.
  3. Press on the device in which you want to program your remote. Here we are going to program a Blue-ray player so we will press the Blue-ray button on the remote.
  4. Point your remote towards the TV and press and hold okay Press until the TV in your case turns off.

This is how you can program your Blackweb universal remote without using code. As mentioned earlier the method can take up to minutes so be patients while following the above step.

When you happened to find the working code for your remote you can release the power button from the remote. After this, the code will be saved in your remote and you don’t have to repeat the same procedure again and again.

Conclusion

These are some of the two methods to program the Blackweb universal remote on a Blue-ray player. The method is somewhat similar to other remote if you have ever programmed a universal remote. Then, you can easily figure out how to program your Blackweb Blue-ray player.

I hope that the method has worked well in your remote. If you have any problem while programming the remote then you can comment on your problem we will guide you.

 

Written by Sonish

Leave a Reply

Your email address will not be published. Required fields are marked *

Cox Universal Remote Codes

Cox Universal Remote Codes For TV

Coolux universal remote setup

Coolux Universal Remote Codes & Program Instructions